Manufacturing-tester for lamps

You can use the FLP/FLP-A (Manufacturing-tester for lamps) to check lamps during the manufacturing procedure. All measurements are complying with standards VDE, EN, IEC.

Technical Data FLP:
Power supply 230 V
Tolerance +6 / -10 %
Frequency 45 ... 65 Hz
Protective conductor check:
Open-circuit voltage 3,5 VAC
Open-circuit current at 0,2 Ohm 10 AAC
Short-circuit current 17 AAC
Limit adjustable 0,2 und 0,5 Ω
Accuracy ± 2 %
Isolations check:
Open-circuit voltage 500 ± 5 % VDC
Short-circuit current < 8,5 mA
Limit adjustable 2 und 4 M Ω
Accuracy ± 2 %
Function check:
Power isolation transformer: 800 VAAC
Function voltage a)
Power supply 230 VAC
Current maximum: 3 AAC
Function voltage b)
External voltage 0 ... 250 VAC
Current maximum: 10 AAC
Option “extra function voltage DC”:
Function voltage 0 ... 250 VAC/DC
Current maximum: 6 AAC/DC
Function voltage c)
Function voltage “12 VDC” 11,5 ± 0,5 VDC
Current maximum: 0,1 ADC
The function voltage from a) till c) will cut-off immediately, in
case of a short-circuit.
Cut-off current: > 6 AAC
We deliver all devices with a certificate of approval which is issued by our manufacturer meeting the demands of ISO 9000.
Mechanical Data:
Housing 19“/3HE
Dimension (B x H x D) ca. 467 x 165 x 430 mm
Weight ca. 26,5 kg