Welcome to — BaiHui XingYe（Beijing）Technology Co., Ltd.!

APL
Engine Testing
Gearbox Testing
Axle Testing
Powertrain Testing
Vehicles
Lubricant and Fuel Testing
Measurement & Rating

KOMATSU
ROLLER PITTING TESTING

F5-Technology
Measuring System LAMBDA
Water Quality Tester
Pipeline Restart Loop
Multi-Place Cold Finger
Wax Flow Loop
Process Viscometer
Laboratory Viscometer
Portable Laboratory Viscometer
Laboratory Viscometer For Smallest Sample Volumes
CGS System In-line Multi-Phase Fluid Monitoring
Optical Detection System
MicroPVT Instrument
Oil Performance Monitor
Grease Test Press
Roll Stability Tester
Gas Hydrate Autoclave System

OMNITEK
Automatic Viscosity Analyzer

EA-Electronic
Isolation-oil breakdown tester

SCAVINI
Petroleum Testing Apparatus

On-Site Analysis
OSA Wear Metal Analysis

A2 Technology
Portable Analyzer for Lubrication
ML/MLp
EXOSCAN FTIR.Out of the Lab and into Your Hands

IHI—TF-Detector
Trace of Ferrous powder Detector

Automatic Viscosity Analyzer of used oil

Automatic Viscosity Analyzer of used oil

Applications

Machine Condition Based Monitoring
Quality Control

Description

The S-flow® is a bench-top automatic kinematic temperature bath viscometer optimized for the analysis of used and new lubricants. It conforms to the requirements in ASTM D445, D446, D7279, IP 71 and ISO 3104. It is also the ideal system for used oil analysis laboratories that need to test a wide range of lubricant viscosities.

The S-flow® is a self-contained viscometer system that consists of a thermostatic bath with circular heater and a control column. The bath contains 4 patented viscometer tubes together with optical sensors to detect the flow of oil through the tubes. All measuring tubes function independently of each other. The control column has an LCD display that provides the user with information about the system’s status and an array of LED’s indicate the current status of each measuring tube. An optional external computer can also be used to control the system for applications where more extensive data handling requirements are necessary.

The user of the S-flow® has the option to operate in two modes, standard viscosity determinations or measuring tube calibration. In both modes, the user chooses how many determinations have to be made for an average result. The operator also controls additional parameters such as tube constants, and cleaning cycle.

Analytical Test

Viscosity in new or used oils
Viscosity Index

Benefits and Features

Viscosity analysis of used oil provides an early warning of lubricant degradation and contamination
Compliant with requirements for ASTM D 445, D 7279 and related specifications.
High throughput – up to 60 samples per hour to ASTM precision.
Small sample volume – 0.3 to 0.6 ml.
Low solvent consumption – 2.5 ml per sample.
Extremely easy to use.
Automatic flow time measurement.
Fully automatic cleaning and drying.
Fast, easy tube replacement, no need to drain bath.
Single or dual solvent injection system.
No PC required for system to operate.
Optional dual measurement capability.